Jump to content

RBS

Members
  • Content Count

    2
  • Joined

  • Last visited

  1. Not too bad for my first go at woodworking - thanks again @12v_dub for the photos and detailed plans. I used a kreg jig with a longer bit to drill pilot holes for 3/8" hardwood dowels for the frame. I added a few pocket screws to support the BBQ shelf but otherwise it's all poor man's mortoise and tenon I don't have access to a planer/joiner as you can see but I'm happy! The 4x4's cracked on me when they warmed up in the shop (pretty common when you have posts with the centre grain I'm told). Structurally they're fine buy I used an exterior wood epoxy to fil
  2. Hi there - can you provide the measurement from bottom of the bbq shelf apron to the ground. I checked all the pdf on drop box but no measurements given. Lower shelf is 6". Building this now in workshop and just realised I'm missing that :-) Thanks so much table is awesome. My first go at something like this I'll be happy if mine turns out 50% as good. Bob Canada
×
×
  • Create New...