Buttburner reacted to Random Pointer in Dome thermometer off by 30-40F
I agree that the dome temp vs the grate temp will be different. I am not worry about it.
However, this is not about dome vs grate. This is dome vs dome.
My original post is about digital thermometer probes (Maverick, FlameBoss) clipped at the dome thermometer probe. The tip of the probes were about two inches apart, and they were different about 30 to 40 F compared to the KJ dome thermometer probe. The higher the temp, the wider the gap. KJ thermometer always showed a lower temp.
I used a Tel-True BBQ thermometer (made for Kamado style cooker), clipped the digital thermometer probes the same way, and the difference was only about 5F. I think it is much more reasonable. I am sticking with that thermometer for now, and I will test the thermometer with another thermometer clipped in with my next few cooks.
Buttburner reacted to Gebo in Another Happy KJ Owner
Well, the ceramic ring at the bottom of my Big Joe II cracked in two places. I filed a claim in April on the ceramic ring and for some reason I received
the metal top ring for a Classic. I got in touch with them and got it all figured out. The ceramic ceramic ring on backorder about a month out. I told them
I really appreciated the metal top ring as I could use one as mine is all warped. I said I would purchase one. KJ said no worries, we will ship you
a new one for you Big Joe II under warranty. SWEEET! I got it about 2 weeks ago.
The ceramic bottom ring was supposed to be here by May 4th. From experience I am figuring June 4th. Not a bid deal. Well, I emailed today
to do a little follow up to make sure I had not been forgotten and now it looks like a mid July ship date. Guess what? For my trouble, they gave me a choice
of a soap or pizza stone for free. That was a no brainer. Soapstone is on its way.
I am amazed at how I am being treated. Oh, if you don't have a soapstone, you don't know how good a steak can taste.
So many times bad things get brought to our attention. Just wanted you guys to know about this good thing.
Buttburner reacted to DonBB in Deep Clean...
I typically fire my Kamado up to 500 then kill it after most cooks just for ongoing cleaning. However much charcoal you will need to reach 600 is how much charcoal you will need if you're just doing a cleaning burn. It does not need to be completely full.
Buttburner reacted to Henry B 3 in How to do a super deep clean.. (and other maintenance/fixy questions)?
Food for thought, every high temp burn I have done in the past resulted in replacing gaskets, warped rings and it can be flat out scary. This would apply to my BGE not the my Joe. Was told the Joe gaskets will hold but I'm not confident. Now I simply let the Kamado run after pulling my food from it for another 30 or so minutes and that has helped me over time from accumulated grease build up. Good luck.
Buttburner reacted to John Setzler in Kamado Joe 2 vs Kamado Joe 3
If the difference all boils down to the sloroller, then I'd say no. It's not worth the difference in that case. I'd still add the charcoal basket to the 2 if you get the 2. If you come to the conclusion that you don't really need the Big Joe and can work with the Classic, get the classic 3 instead of the Big Joe 2. You would be amazed at how much meat you can cook on the Classic.
Buttburner reacted to Geoff Taylor in Kamado Joe Tumbler Basket - FLAKING
I’m an ex chef - now in an IT related role. In my job, nothing with a critical known defect gets released. Ever. I love my Kamado Joe, but it absolutely defies belief that this product was not tested over and over and over again, 100 cooks or more before proceeding to production and release. It has to have surely. So ... how is this happening? I can’t fathom it. Surely a company like KJ would do thorough testing?
Buttburner reacted to Brandon Store in Kamado Joe Tumbler Basket - FLAKING
My control tower flakes and that I dont care. Functionality over looks for me. However, This I care because my second batch of wings were coated in the flaking. I threw em out. Maybe Ill get it sand blasted and strip the coating completely
Buttburner reacted to Charles Wagon in Rusted Cast Iron Fire Grate
A soak in an equal mix of white vinegar and water should go a long way in removing/dissolving the rust. Then, go at it with mechanical scrubbing.
Here's a good resource on cast iron cleaning:
If this is the fire grate, I don't see the point in seasoning it, or actually, even spending too much time on rust removal. In the firebox, any seasoning would likely be burned right off, leaving bare cast iron, which will rust again.
A high temp cook off will cook off any seasoning on the fire grate, or other cast iron surfaces.
Buttburner reacted to John Setzler in Kamado Joe Cooking Channel - no more John Setzler?
I decided to change things up a bit last summer. Atlanta Grill Company had showed a lot of interest in parterning with me back in 2019. After some discussions with them I started that partnership early in 2020. I decided that it was in my best interest to focus on the partnership with AGC and continue my support of the Kamado Joe product line through the Atlanta Grill Company partnership rather than trying to do both.
I make one or two videos a week that get posted to the Atlanta Grill Company Facebook page and YouTube channels. I also typically share those vides out to my Man Cave Meals Facebook page as well:
I have also opened up a new platform where I am producing free and exclusive content for anyone who wishes to support my efforts with a membership:
Buttburner reacted to John Setzler in Why can’t I keep the temperature at 225 degree?
This is why
There is a learning curve with Kamado grills. Not many people master temp control on the first or second or third or fourth try.
I would recommend having a look at the pinned post in the Kamado Cooking section called "The Kamado Book of Knowledge". That is a little document I put together that will get you over the learning curve quickly and demystify a lot of notions about kamado cooking.
Buttburner reacted to jtemple in Is the Sloroller worth it?
The main downside is cleaning it, if you care to clean it. You can't burn off all the grease like you can with the ceramic heat deflectors. Anything over 500 with the slo roller and you'll warp it.
Mine is gunky enough that the pieces stick together when it's cold, more so when it's below freezing outside. I have a 16" diameter drip pan that is just bit smaller than the top disk of the sloroller, and that still doesn't stop all the grease buildup.
I have cooked with and without it, and frankly can't tell the difference. The only reason I use it is because it came with my grills. I wouldn't buy one.
Buttburner reacted to Polar Bear in Why can’t I keep the temperature at 225 degree?
Here is what i believe causes Temp Creep, but I'm happy to be corrected by the members here
When you start your grill, if you do not allow it to come up to temp and heat soak the ceramics before you put your meat on, you have a portion of your thermal energy (created by the fire) being slowly absorbed into the ceramics
So, your fire is actually too big for the temp you want because once the ceramics have absorbed the required thermal energy, it now becomes ambient thermal energy (ambient grill temperature)
The amount of charcoal in the fire box doesn't matter at this point, your fire is too big for the temp you want maintain.
You could reduce the amount of fuel you start with (in order to avoid a large fire) but then you run the risk of running out of fuel before you complete the cook.
Basically, you need to cook more and take your time
Next time, dont touch your vents once you set them
If your grill eventually settles at 300f, let it stay there (cooking briskets at 300f is fine, i normally do mine at 330f).
See what the temp does for the entire cook if you leave it alone. It'll settle where it settles after 3 or 4 hours, then you'll have a baseline of vent settings for next time
Rinse and repeat
I recommend avoiding brisket while you are learning this process
Its an expensive cut of meat with a reasonable margin for error if you already know what you're doing
Stick to chicken and pork til you know how your grill works and you've still got your training wheels on
Buttburner reacted to Polar Bear in Why can’t I keep the temperature at 225 degree?
Sounds like temp creep
Try setting your vents earlier
If you want a long stable cook, add a starter cube, let it burn for around 10min with the lid open, then shut your lid and set your vents
Leave it alone for at least 90min
When you come back, it'll be fully heat soaked and what its settled at is what it will stay at (unless you change a vent setting)
Dont stress about a 25f to 50f difference. If you want 225f and it settles at 250f, you'll be fine, dont try to chase it
These things take time to come up to temp
Every Kamado is different so the vent settings you see on You Tube videos may not always translate to your backyard, use them as a guide and go from there
Buttburner reacted to Duke_Kaboom in Kamado Joe Usage During Cold Winters
Turned out great! I did one turkey with a bbq rub on the joetisserie for an hour, then it went into the fryer for 3 min/lb. This one stayed on the joetisserie for about 3 hours or so with a butter lemon herb mix. Temp was between 300F and 320F (I used the flame boss to try and keep it dialed in, as it was windy and quite cold yesterday). Both birds were fantastic but I prefer this one. I'd say it even beats spatchcocking.
One note for other newbies out there that I want to mention - adjust your rotisserie clamps every hour or so. As the bird cooks/shrinks you may have to reseat and push them together more during the cook to get a firm grip.
Buttburner reacted to Rick_W in Kamado Joe Usage During Cold Winters
My temps rarely get into the teens (°F) but I just build the fire as normal and let it cool off as normal. I don't see how you could thermal shock the ceramics unless you let the fire build to max temp and then threw ice water inside. I've seen pics with snow still accumulating on some eggs during low and slow cooks.
Buttburner reacted to LargeRedJoe in Firebox piece missing on my brand new Big Joe
That is a really weird quality control issue. Prior to shipping the petals are firmly snugged into form-fitted Styrofoam packing material and then placed inside the grill. It means someone either a) didn't pack a petal or b) removed one petal before the crate left the factory (broken, chipped, whatever). IOW that gap in the styrofoam would / should have been visible.
You can try to nudge KJ to send a complete firebox; those may be in stock vs. a single petal. But I'm just spitballing...