I am new to the site and messed up the location of my post by initially putting it in the introductions section. Below is the link to that post.
I am looking for ideas on small cracks forming in the firebox of my New Old Kinuura Yaki #5 Kamado.
Photo of kamado for fun
Texan, currently living in Seattle, finally got a backyard to do some grilling in this summer!
I'm currently grilling on a Weber performer, while I restore a Big Joe that I got off fb marketplace. I have a thread in the DIY section with some photos if anyone is interested or has some good recommendations.
Can't wait to get cooking on the Kamado once it is up and running. Most looking forward to cooking some pizzas and of course brisket, being a Texan!
I'm new to the world of Kamado cooking and to this forum, so I'm looking forward to some dialogue.
So I recently found a Big Joe for sale on fb marketplace for the irresistible price of $100! The main body is in not terrible shape, but it's missing quite a few items, and will need some cleaning/repair. I'm hoping the combined expertise hear can help me get this thing in good working order for the least amount of extra $ possible, and more importantly without damaging the integrity of the grill.
The ceramic body itself is in good shape with no major cracks or chips. There are a few issues that need to be addressed however:
The upper part of the interior has some green staining. I assume this is from algae/moss since I live in the PNW. Any tips on how to gently clean this, or should I just do a burnout when I get the rest set up? The felt gaskets are in pretty bad shape and will need to be replaced (tips on cleaning and removing gunk would be welcome too). The wire mesh gasket is mostly intact but has come loose. Does anyone know of an adhesive that would be safe to use to re-attach it? I'm not sure what to call this, but the hole that helps align the hinge on the back side of the band has been worn quite a bit. Making the hole about 1 1/2" long and the ceramic a bit crumbly there (see pic). Does anyone know of any substance I could safely patch this with, and how best to reattach the bands?
At that low of a price I wasn't too concerned about replacing a few parts, but after price checking I found I need approx $400-$450 in replacement parts. I can get most of these from BBQ Guys, but I figured I would reach out to the community here and see if people had recommendations for third party replacements, custom ideas, or (fingers crossed) extra parts that they need to get rid of. Here is a list of what I need:
Firebox Deflector Grill Grates Flex cooking rack (is this necessary or is there another way to grill/smoke without it?) Replacement Gasket kit Missing the upper half of the cart, not sure if I will try and purchase that, or make a custom table I will be focusing on grilling and smoking with this grill, so I don't really need some of the specialty items.
I know this is a lot of information/questions, so don't feel like you have to address everything, but if you have some advice on any of the subjects, I'd greatly appreciate it.
Thanks and happy grilling!
Ive had a few pizza sessions on my kj classic 2. Although the last time i warped the steel firebox ring so not sure that should count as successful! I thought it aould be good to ask a kj specific question.
My set up is deflectors on the grill in top position. Spacers on top of that with pizza stone then on top.
So my question/s is when doing high heat cooks:
1. How long do u let the kj heat sink for? I have just opened the vents and let it ride. When up to 650/700 put pizzas on.
2. Where do people set their vents? How open is the bottom and top? As above i nlrmally just open them up and stick the pizza on at above the 650/700 mark.
3. How long should this sort of temp last or is safe for the kj? If i had a pizza party how long could this keep up for eg.
Any advice or thoughts is welcome?