Jump to content
  • Similar Content

    • By PorkyBoy
      Hey all. First time posting!
       
      So I got my first Kamado, a standard size classic Kamado Joe about six months ago. Loving it, but still working on getting my smoke technique right. Seems to be the main challenge with a Kamado as opposed to other types of smoker, as its hard to get the wood to burn hot enough to produce nice quality smoke without it burning out too quick or spiking the temperature. It's definitely possible and I have achieved it from time to time but consistency definitely seems to be something everyone struggles with, judging from the amount of posts on the topic and the huge variation in techniques.
       
      Anyway, I had a thought. Would it be possible to produce charcoal that wasn't quite finished combusting, so that a certain percentage of the tasty non-carbon wood compounds remained? Just enough that you could simply use this instead of regular lump + regular wood, and you'd be pumping out a small but consistent amount of wood smoke throughout the burn? No more fretting about chunks vs chips, where to place and whether & how to add partway through. Plus no worries about either sudden belching of thick smoke or its total disappearance!
       
      Or am I misunderstanding the process, and any such 'incomplete' charcoal, while producing some smoke, wouldn't necessarily be producing the right type to make those butts delicious?
       
       
    • By Wardy
      So started my first overnight cook (two 5 1/2 pound pork shoulders) on my Weber summit kamado very early this morning. Planned for 10-12 hours at 225-250 so it could get rested and pulled for an early dinner at 4pm. We're hosting a baby shower for my sister in law so want plenty of food without me standing over the BBQ too much whilst people are here. I've been finding sourcing large pork cuts tricky here in the UK but spotted 2.5 kg pork shoulders in costco so picked a couple up.
       
      Did a basic rub of salt, sugar, paprika, garlic powder, chilli and sage. Left the cuts to sweat for a couple of hours and got the grill set up. 
       
      I had some problems getting the temperature stable in the first place, I was aiming to start the grill about 11 and get the meat on for midnight. I overshot the temp, I think because I added too much lit coal, so spent untill 1am getting the temp back down and stable. I put the meat on at about 12.30am. Not planning to look at the grill again until the morning.
       
      Got woken up by the kids so checked the temperatures at about 3 am and all was good. This morning I woke up at 8 to find the fire had gone out. Looks like either the ash from my briquettes had blocked the lower air intake or I'd set the vents too low in the first place. Think I'll try lumpwood next time and see if that's better.
       
      I've got the grill back up to temperature now (about 9.30am) and fingers crossed 4/5 more hours will do it. Internal temp has just hit 152 so I'm pretty sure it should still be fine. The dome is currently at 260 which is slightly higher than I want but probably not a bad thing all things considered.
       
      I wasn't planning to wrap the meat when it hit the stall but now am thinking it might be a good idea. I think I'll see where it's at at 11am. 
       
      Atmospheric picture of the grill being lit and the pork shoulders going on from last night:


       
      Will update with how they turn out later 
    • By Tom_V
      First cook on Joetissorie on the Akorn, and yes it fits perfect! I used a combination rub of KC's and Dinasour BBQ Cajun Foreplay. (Dinasour BBQ is the BEST BBQ restaurant in NY State) I also made a paste with same ingredients and rubbed under breast skin and inside cavity. Akorn running at 400-425 deg. Amazing flavor!



       
       
    • By Cranky1
      Hi all,
      Just got an Akorn 16820 and mother nature decided to go all cool and wet on me. Looking forward to trying this thing out.
    • By Millerb7
      So I have myself an Akorn for about 4 years. Through a couple moves while building a new house, it was pretty neglected... sat outside, uncovered through winter, rain, etc. Needless to say due to the metal build, it rusted something bad. I ended up getting rid of it and decided I'd see what the Weber Kettle hype was all about. I picked myself up Kettle Master Touch.......... wow...
       
      I freaking hated it. Was horrible to keep temps. Took forever to get up to temp. Was terrible to use with lump (as it fell through the grates)... just a bad overall experience. Cooked on it about 4 times then sold it. Now... I live in a VERY windy area. Like 10-15 mph winds almost constantly.... so I'm sure that played a part... but it was no enjoyable.
       
      I decided to pick myself up a new Kamado Joe Classic from Lowes for $650..... I'm in love.
×
×
  • Create New...