I dug up my old files today and found this hitch rack I designed and built back in 2015. I couldn't find the installed pic but I was hauling my akorn around with it.
Never made it to production but if there is enough interests here I may make a few sets. I'll tell you there will be a lot of compliments at traffic stops haha.
The floor jack will be replaced with a standalone hand truck that can be used as a floor stand when the grill is off the truck.
My wifed signed me up for BBQ Ribs at my son's baseball endgame party. After working on my own controller like nuts for 3 years she now signs me up for every potluck party we go. So I was on a quest to find out how to use minimum effort to make pro-like ribs. I figured I'll make a video for it since I haven't smoked much of ribs for a while.
Here is a process I tested today and the ribs turned out to be just as savory and tasty as, well, finely prepped ribs. It'd add a few points with some freshly cut herbs and garlic but these ribs turned out to be just amazing. Here is the process, no overnight seasoning, no wrapping and no mopping. The grill was not touched til the end.
1. I went straight to Costco and picked up some pre-dry-rubbed St. Louis Cut Ribs. I've used them before and they are great. For only $3.49 /lb and seasoned, this is the best bang for the buck. This way I don't have to buy them ahead of time. The ribs are good to go. The rub was called "Souvloki" rub and it got a little heat in it.
2. I curled up the ribs into a standing tube with two skews. This way the ribs are cooked 1~2 hours faster and even on both sides. It took three hours to cook the ribs to 210 internally.
3. Lit the starter cube, put in the heat deflector, insert the meat probes and grill probe. Put the meat in and close the lid for the first and last time.
4. Set the temperature controller to 270. I was just experimenting with it, It worked really well. A nice bark was formed yet the inside is savory. It pulls off the bone easily.
5. That was it. No wrapping no mopping no nothing. Just cruise around for 3 hours and take it straight out of the grill and eat.
So next time if you are in a hurry or just being lazy...you know what to do.
Hi all, we made a little video about cooking frozen pizza from stores. It was a fun lunch at work. When I first made the pizza ring 2 years ago there weren't many frozen pizzas in the stores, most are thick crust. but now...wow, they got their own aisle. So we dust off the pizza ring and made pizza lunch at work.
We tested more than 8 different brands of pizzas, and Newman's thin crust cooked best in the Akorn Kamado, California kitchen's Sicily pizza had a perfect dough/topping ratio, and even the cauliflower dough tasted good from the stone. The stone was kept around 450 - 500, anything higher may burn the dough without full cook the toppings. So on thicker dough keep the stone under 400 will be a good idea.
Talking bout the stone, we used Rockheat we bought from Amazon, I'd recommend it. simple but smart handle design. We're working on a pizza stone with a digital thermometer built in, then you won't need the Infrared gun to read the stone temperature. I can probably program our controller to keep the stone temperature consistent.
Grill = Akorn. Temp control by TipTopTemp. No leaks. Probes = Thermoworks Smoke and Thermopen MK4. I've confirmed that the probes are accurate, and there was no obstructions on the pit probe.
Put on a 16lb Packer (probably a few pounds less after trimming) at midnight. According to the Smoke's graphs, the pit temp held between 215-235 all night.
The brisket hit the stall after only 3 hours of cooking, so IT of 160 by 3AM. When I woke up to make some pit adjustments (it jumped to around 250 at 6AM, probably when the sun came up and the TTT compensated for change in ambient temp) the meat was already at around 180, so I'm wrapping in butcher paper, however it's going to be finished - including resting - in under 12 hours, which just doesn't seem right.
Had I wrapped when the stall hit, that would have been at 3AM, and maybe it would have been done around 8. How is that even possible for a 16lb packer? Everything was timed so that it would be done (including rest) in around 16 hours, though obviously every piece of meat is different. I would not have expected a piece to be THIS different though.