I am looking for a table to house my Classic 2 and provide basic shelves/storage but nothing too elaborate. I live in New England so am looking for something that can survive 4 seasons.
Thanks to @Kamadobjorn for the inspiration. The table is the “Applaro” Line. The hardware that you see in the last pictures all came from Hobby Lobby. The table comes with a thin, cheap pull bar and nothing else, not even knobs for the doors. The cooler pic is just for reference as that was what I was doing prior to getting the table. The last pic is sans hardware just the way it comes from IKEA.
I used Lenox 18TPI metal jigsaw blades with an adjustable speed jigsaw set to its lowest setting to cut the hole. I used this edge trim from Amazon: Trim
I have a smokin stone for my AKORN Kamado, but wanted one for my AKORN Jr.. I found that not only are they scarce, but pricey too. From searches on the forums I did not really see a good solution, so I gave it a try myself to come up with one. Here is what I got:
Wally World has Lodge 10.5 inch griddles for $14.88.
Once out to the shop I cut the handle off. Just eye balled the cut off point to fit on the shelf in the cooker.
Went to the grinding wheel to eliminate the rough surfaces and then drilled holes in the handle and handle lip to hold the bolt, nut and lock washer.
Fit nicely in the cooker and was very stable.
You can remove the deflector with BBQ gloves or use the grill handle which fits nicely in the slot of the griddle handle.
Fired up the grill and seem to work just fine with some salmon fillets I did.