Hi Kamado Peeps,
So, my friend bought me a 100 day grain fed Cattleman’s cut. I went reversed seared method, but not finished off in pan ON the GRILL
Slowly brought her internal up to 49° Internal and rare. I had a steady burnt with cherry wood for over an hour. Let rest and then finished off sliced on a bed on mashed potatoes, blanched asparagus with chimichurri homemade sauce.
What a brilliant pcs of meat just so good. One day I might spend the money and try a Wagu…
Hi Kamado Peeps,
Did a reverse sear over the weekend with some chimichurri sauce.
Scotch fillet a good inch or two thick smokes with cheery wood for about 1.30 hours and then seared. Set my probe on rare so internal was 49°but a little too rare for the wife so next time I will sear longer of go for a medium rare. The steak was fabulous for me dressed with sauce and some roasted veggies.
I have ordered some dry aging bags, so I hope there get to me soon as I am super excite to try dry aging and then reverse searing or even just a grill/searing.
Any tips and/or links for dry again will be appreciated.
I'm new to the world of Kamado cooking and to this forum, so I'm looking forward to some dialogue.
So I recently found a Big Joe for sale on fb marketplace for the irresistible price of $100! The main body is in not terrible shape, but it's missing quite a few items, and will need some cleaning/repair. I'm hoping the combined expertise hear can help me get this thing in good working order for the least amount of extra $ possible, and more importantly without damaging the integrity of the grill.
The ceramic body itself is in good shape with no major cracks or chips. There are a few issues that need to be addressed however:
The upper part of the interior has some green staining. I assume this is from algae/moss since I live in the PNW. Any tips on how to gently clean this, or should I just do a burnout when I get the rest set up? The felt gaskets are in pretty bad shape and will need to be replaced (tips on cleaning and removing gunk would be welcome too). The wire mesh gasket is mostly intact but has come loose. Does anyone know of an adhesive that would be safe to use to re-attach it? I'm not sure what to call this, but the hole that helps align the hinge on the back side of the band has been worn quite a bit. Making the hole about 1 1/2" long and the ceramic a bit crumbly there (see pic). Does anyone know of any substance I could safely patch this with, and how best to reattach the bands?
At that low of a price I wasn't too concerned about replacing a few parts, but after price checking I found I need approx $400-$450 in replacement parts. I can get most of these from BBQ Guys, but I figured I would reach out to the community here and see if people had recommendations for third party replacements, custom ideas, or (fingers crossed) extra parts that they need to get rid of. Here is a list of what I need:
Firebox Deflector Grill Grates Flex cooking rack (is this necessary or is there another way to grill/smoke without it?) Replacement Gasket kit Missing the upper half of the cart, not sure if I will try and purchase that, or make a custom table I will be focusing on grilling and smoking with this grill, so I don't really need some of the specialty items.
I know this is a lot of information/questions, so don't feel like you have to address everything, but if you have some advice on any of the subjects, I'd greatly appreciate it.
Thanks and happy grilling!
I have been seeing whole fish at Costco for some time now so I decided to give it a go. I bought some snapper for diner last night and was blown away by the results.
I watched Mr. Setzler's video on grilling a whole fish as a guide along with some recipes I found on the interwebs.
2 snappers gutted and cleaned (got mine from Costco as I said previously) Cut crosshatch slits on both sides of the fish (next time I will just do horizontal slits for easier removal of skin) Seasoned with garlic rosemary seasoning Salted with a few pinches of kosher salt Spritzed with olive oil generously on each side Stuffed cavity with fresh rosemary, thyme and dill from the garden Sprinkled lime juice to finish off
Using the Big Joe, I lit just one side and set the fish for direct at the highest level grate. I used a fish\veggie tray to keep the fish from falling apart.
I had the temp at around 300-325 and grilled each side for 9 minutes until the inter temp as around 140.
The flavor was amazing! I don't think I would have the intense herb flavors if I had just cooked fillets but I will be trying that in the future.
I served the fish with some leftover bulgur pilaf and a spinach berry salad.
I have never had snapper before that I can remember but I am now a huge fan!!