Jump to content
  • Similar Content

    • By JohnnyAppetizer
      Saw this in Kroger a while back. Then I saw it on Shark Tank. Anybody tried it?
      Sustainable Hardwood Charcoal Briquettes – Prime 6 (prime-six.com)
    • By Bomb Dog Barbecue
      I have a question for the community about fire construction and how much charcoal I should be using when I set up a cook. I have a KJ Classic III and have been using the SloRoller for all of my low and slow cooks.
       
      On some of my larger cooks (one pork butt, a full brisket, and then two boneless pork shoulders) I have burned through all of my fuel before the cook was done. I filled the standard KJ ash basket with charcoal and then light it up with one KJ firestarter. I was smoking everything at around 250F and followed the heating method described by SmokingDad BBQ on his YouTube channel (it worked well!).
       
      Does anyone have an image of what their charcoal looks like when setting up for a 10lb brisket or pork butt?
    • By Go Apps
      Soon I'm going to smoke a 12lb. brisket on my Big Joe using my new
      FireBoard
      . I plan on cooking overnight. Would I need to wrap, or just let it go for 12 hours or more?
    • By pmillen
      This isn't a complete product review...yet.  I haven't burned any of these but I will soon and will add to this thread.  Hopefully other users will also add their thoughts.
       
      I'm sometimes annoyed at lump charcoal because of either the–
      small shards that pack too tight or fall unburned into my Masterbuilt 1050's ash bin huge chunks that sometimes reduce the heat produced Briquettes don't usually work out for me because they–
      make more ash than I want usually can't be relit after snuffing
      Jealous Devil introduced a line of extra large briquettes.  Their web site describes them as, "The same incredibly dense hardwood we use to make our lump charcoal – plus a pinch of plant-derived starch (that is it – Yes, really)."  They go in to say that the briquettes have, "Extremely low ash production."
       

      They're certainly larger than Kingsford Originals, and much thicker.  I didn't weigh them.
       
      My first use will be in my Masterbuilt 1050.  I'll report back on that.
    • By loki
      Waiting, waiting, waiting for the Kamado Big Joe to arrive. Nothing.
       
      Welp, expecting friends from out of town this weekend and can wait no longer. So, I picked up a Weber Summit Charcoal grill (kamado style) along with a Pit Viper fan. Once the Big Joe arrives I'll have two Kamados!
       
      Anyhow, I tried the new Fireboard 2 Drive on this grill along with a Pit Viper fan for a hot smoked pork belly session.

      I was in a bit of a rush to get things going so I used the fan to stoke the coals up to temperature with a target of 225F. With the Weber bottom vent fully closed and the top vent 1/4 open, the temperature initially overshot about 15 degrees. I brought the temperature down by opening the lid briefly when adding the belly and to make other adjustments (the dips in the graph).
       
      Once things were settled in, though, the temperature was regulated on the order of tenths of a degree around the 225F target . That's pretty awesome.
       
      Sitting at the computer typing emails and monitoring the temperatures on a browser. With the Fireboard 2 Drive and the kamado, this set-up has better performance and regulation than our kitchen oven.
       
       
×
×
  • Create New...