Jump to content

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Similar Content

    • By COKAMADO
      All,
       
      I am new to the site and messed up the location of my post by initially putting it in the introductions section. Below is the link to that post.
       
      I am looking for ideas on small cracks forming in the firebox of my New Old Kinuura Yaki #5 Kamado.
       
      Photo of kamado for fun
       
       

    • By cameronleespencer
      Hello there!  
       
      I'm new to the world of Kamado cooking and to this forum, so I'm looking forward to some dialogue.
       
      So I recently found a Big Joe for sale on fb marketplace for the irresistible price of $100!  The main body is in not terrible shape, but it's missing quite a few items, and will need some cleaning/repair.  I'm hoping the combined expertise hear can help me get this thing in good working order for the least amount of extra $ possible, and more importantly without damaging the integrity of the grill.
       
      Condition Report:
      The ceramic body itself is in good shape with no major cracks or chips.  There are a few issues that need to be addressed however:
      The upper part of the interior has some green staining.  I assume this is from algae/moss since I live in the PNW.  Any tips on how to gently clean this, or should I just do a burnout when I get the rest set up?  The felt gaskets are in pretty bad shape and will need to be replaced (tips on cleaning and removing gunk would be welcome too).  The wire mesh gasket is mostly intact but has come loose.  Does anyone know of an adhesive that would be safe to use to re-attach it?   I'm not sure what to call this, but the hole that helps align the hinge on the back side of the band has been worn quite a bit.  Making the hole about 1 1/2" long and the ceramic a bit crumbly there (see pic).  Does anyone know of any substance I could safely patch this with, and how best to reattach the bands?  
      Missing parts:
      At that low of a price I wasn't too concerned about replacing a few parts, but after price checking I found I need approx $400-$450 in replacement parts.  I can get most of these from BBQ Guys, but I figured I would reach out to the community here and see if people had recommendations for third party replacements, custom ideas, or (fingers crossed) extra parts that they need to get rid of.  Here is a list of what I need:
      Firebox Deflector Grill Grates Flex cooking rack (is this necessary or is there another way to grill/smoke without it?) Replacement Gasket kit Missing the upper half of the cart, not sure if I will try and purchase that, or make a custom table I will be focusing on grilling and smoking with this grill, so I don't really need some of the specialty items.
       
      I know this is a lot of information/questions, so don't feel like you have to address everything, but if you have some advice on any of the subjects, I'd greatly appreciate it.
       
      Thanks and happy grilling!






    • By firebox
      What is the top diameter of a firebox on a classic Joe?
    • By DK45
      My Primo XL FIREBOX has severe cracks. Original crack started at one of the vent holes and gradually propagated to form major crack. 
      Is this a common problem?
       
       


    • By CoyoteCook
      Hello Again ~ After much searching, reading, and scrounging around here and other sites in the BBQ / Kamado Web World, I boldly went where I had feared to go for close to 10 years.  The precious Kamado that I inherited from my parents - and fought with a sibling to get - received a long overdue touch up.  I realize how fortunate I am to have this amazing Imperial Kamado #3. - perfect in all ways except the external finish and no gaskets - yet.
      After a good cleaning, I used high temp engine paints to create a finish that is inspired by what I think it looked like when my parents purchased it from the Pachinko Palace way back when.  I did take photos along the way.  I dabble in the art world, and really like to DIY, so this was a really fun project.  These are the before and after photos. (I posted the before when I joined a while back.)
       
       

×
×
  • Create New...