By social assassin
I’m looking for any tips on how to cook a full packer brisket on my KJ Classic 2. To date I have only smoked brisket twice; one time each of the Point & the Flat. After seeing them in person at Costco it doesn’t look like it will fit on my KJ. How do you make it work?
I am not sure if I posted this question in the correct thread.
Cooking my first brisket on the KJ Classic 2 and had a lot of trouble with thick white smoke. My process below, if anybody can help me find the mistake it would be much appreciated!
- Loaded KJ with Jealous Devil lump charcoal and mix ~5-7 oak log chunks of medium (?) size. Logs were highly likely kiln dried but I did get them in firewood-like logs from a meat market vs the mass distro grocery store/home improvement bags
- Used Royal Oak starters and got the lump lit for about 15 minutes, then a couple of the oak chunks caught and I got a decent fire.
- Closed the top but opened the vent fully to try to let it smoke out and carbonize. Temp jumped pretty quickly to about 350 so I choked it back and got it stable around 260 but the thick white smoke continued for a solid 45+ minutes at which point I had no choice but to start the meat
- White smoke continued for another hour+ after this, albeit it didnt billow out quite as aggressively. This went on for a couple of hours at least which seemed like an excessively long time.
So I am smoking my first brisket on my Kamado Joe Classic II and pretty well following Johns Brisket 101 video from the Kamado Joe YouTube channel. It has been on about 4 hours at 225 degrees and my dome temp was steady until it started to rise about 30 min ago. It stopped about 250 degrees and seems to be holding steady there now. Any advice on why this happened and if it’s okay? Should I try to lower it? If so, what is the best method. Getting good blueish smoke and have been for most of the cook. Any help would be appreciated.
This weekend I'm attempting my first dual-cook, a pork shoulder/butt and a brisket flat. I have a KJ Classic and an Akorn Jr, so I could do the pork on the Junior and brisket on the classic and not worry about it. But for the sake of only using one grill for two things that cook generally the same in terms of temp (also admittedly, I just kinda want to try it), I'm planning to use the extender rack on the KJ, put the butt on that then add the flat under it a few hours later as I'm anticipating less time for the flat than the butt (Never done just a flat, only packers, but I think the flats take less time?).
Has anyone ever done this? My only concern is the butt dripping fat all over the brisket, not sure if that will change the flavor or get it all greasy and it's a big no-no? Or will it not mess with the flat at all and if anything make it better from dripping fat all over it and keeping it from drying out?
As we all know, there's a big game next weekend, which means a big-time cook to match. I have a vacuum sealed frozen brisket that's around 15 pounds that I'll need to thaw out. I've not done this with such a large piece of meat, and some folks have me worried that if the outside ends up being too warm too long people will die. I don't have room to let it slowly thaw in the fridge, and it is hurt-your-hands frozen. Is there a certain method I should use? Surely a cooler full of water would be fine, right? Just don't know how long it'll take. Thanks for the help, folks!
Edit: two weekends away